Anthem AVM60
Preamplificatore A/V multicanale 11.2. 4K UltraHD, 3D e HDR
(modificale nel modulo Rassicurazioni cliente)
(modificale nel modulo Rassicurazioni cliente)
(modificale nel modulo Rassicurazioni cliente)
Audiophile-Friendly 11.2 Pre-Amplifier/Processor
Multi-channel flexibility
Few A/V Preamplifier-Processors offer the innovation and performance found in the all new AVM 60. Features include Dolby Atmos & DTS:X immersive audio decoding, support for UHD Blu-ray and 4K60 through HDMI 2.0a with HDR. HDCP 2.2 and 18.2 Gbps are also included allowing switching for compatibility with the latest video formats.
Audiophile-friendly features include a toroidal power supply, premium differential-output D/A converters with 32-bit conversion and sampling rate optimized filters for hi-res sound. Premium A/D converters with 106 dB signal to noise ratio ensure the highest- quality sound when using analog sources.
DTS Play-Fi offers easy-to-use music playback from popular streaming services and locally networked sources, controlled through iOS, Android or PC apps.
AVM 60 Features & Functions
11.2 Pre-Amplifier Channels
Dolby Atmos®
DTS:X™
ARC™ Anthem Room Correction
4 Speaker Profile Memories
Quad Core Digital Signal Processing
Two Sub Out Jacks (parallel)
Premium 32-bit / 768 kHz Differential-Output D/A Converters
Wireless Network Connection
DTS Play-Fi® + "Works with Alexa" certification – Local and Streaming
HDMI & Video
HDMI 2.0a
HDCP 2.2
4:4:4 Subsampling at 4K60 (18.2 Gbps)
High Dynamic Range (HDR)
Dolby Vision™ Compatible
Hybrid Log Gamma (HLG)
BT.2020 Color Gamut
On-Screen Display with 4K 50/60
4K 50/60 Switching
Additional Features & Functions
FM Tuner
Low Standby Mode power consumption
Remote control app for iOS (Apple) and Android (coming soon!)
Decoding
Dolby TrueHD
DTS-HD Master Audio
Listening Modes
AnthemLogic – (11.2 channels)
Dolby Surround
DTS Neo:6 – Cinema, Music
All-Channels – All-Speaker Stereo
Inputs
8 HDMI inputs (7 rear and 1 front-panel input)
Digital Audio Inputs: 2 Coaxial + 3 Optical
5 Stereo Analog RCA Inputs
HDMI On-Screen Display – setup, video adjustments, status, song/artist info from radio stations
MHL Supported Inputs
xvYCC, Adobe RGB, Adobe YCC601, sYCC601, Deep color
2 Parallel Outputs
Consumer Electronic Control (CEC)
Audio Return Channel
Standby Pass-through
Custom Installation
IR Control
RS-232 Control
IR Input (Configurable)
12V Trigger Output
Control System Drivers
Additional Features
Backlit Remote Control
Sidemount Rack Kit (sold separately)
AVM 60 Specifications
PREAMPLIFIER (MEASURED AT XLR OUTPUT) | ||
Maximum Output (<0.1% THD) | 8.4 Vrms, subwoofer channel 9.9 Vrms | |
Frequency Response (2 Vrms output) | 10 Hz — 35 kHz (+0, -0.25 dB) | |
Frequency Response, Analog-Direct (2 Vrms output) | 10 Hz — 80 kHz (+0, -0.25 dB) | |
THD+N (2 Vrms output) | -95 dB | |
S/N Ratio (2 Vrms output, IEC-A filter) | 110 dB | |
XLR Configuration | Pin 1: Ground, Pin 2: Positive, Pin 3: Negative | |
POWER CONSUMPTION | ||
Typical Load | 60 W | |
Standby | 0.3 W | |
Standby IP Control Enabled | 4.7 W | |
Standby HDMI Bypass Enabled | 8.2 W | |
DIMENSIONS | ||
Height | 6-1/2" (16.5 cm) | |
Height with Rackmount Kit | 4U | |
Width | 17-1/4" (43.9 cm) | |
Depth (not including power cord) | 14-1/2" (36.4 cm) | |
Weight | 20 lb (9 kg) | |
POWER REQUIREMENT | ||
120 V version: | In countries where the line voltage is 120 V, this product operates from a single phase AC power source that supplies between 108 V and 132 V at a frequency of 60 Hz. | |
220-240 V version: | In countries where the line voltage is 220, 230, or 240 V, this product operates from a single phase AC power source that supplies between 198 V and 264 V at a frequency of 50 Hz. |